H2O Wireless is a network operator running on AT&T GSM network technology. The network provider is known for offering phone services like wireless data services. However, you can only utilize the data services if you have used the correct H2O Wireless APN settings. You must use the correct APN settings for your phone to access internet services via the H2O Wireless network. Come with us to learn more about the H2O Wireless APN settings.
Follow The Guideline To Setup Your H2O Wireless APN Settings
If your phone fails to connect to the internet, you must manually set up the H2O APN settings to receive the connection. Below are the H2O APN settings on different versions of mobile operating systems.
Locating & Setup H2O Wireless APN Settings on Android
Find the APN Settings on Android varies based on the manufacturer and the version of the Android your phone is using. Actually, the version primarily determines the location of the settings. However, despite the variation in manufacturers and versions, the APN Settings on Android are the same. Kindly follow the following guide to locating the APN settings on your Android phone.
- Switch your phone on and go to the Settings app on your home screen.
- Once it opens, locate the “Wireless network.” You will have to tap on the “Network and Internet” option for some devices before proceeding.
- Scroll down and locate the “Mobile Network” option, and you will see the “Access Point Names.”
If you were using another carrier, delete what is there and enter the H2O APN settings to access the internet. You will be provided with the correct H2O APN settings in the section below. If you do not want to delete them, you can opt to reset them to default and find out where you will have internet connectivity.
H2O Wireless Android APN Settings
- Name: H2O APN
- APN: PRODATA
- Proxy:(not set – leave it blank)
- Port: 80
- Username:(not set – leave it blank)
- Password:(not set – leave it blank)
- Server:(not set – leave it blank)
- MMSC: http://mmsc.mobile.att.net
- MMS proxy: proxy.mobile.att.net
- MMS port: 80
- MCC: 310
- MNC: 410
- Authentication Type: PAP
- APN type: default,mms,supl,hipri
- APN Protocol:(not set – leave it blank)
- APN Roaming Protocol:
- Bearer:(not set – leave it blank)
Alternate 1:
- Name: H2O APN
- APN: PRODATA
- Proxy:(not set – leave it blank)
- Port: 80
- Username:(not set – leave it blank)
- Password:(not set – leave it blank)
- Server:(not set – leave it blank)
- MMSC: http://mmsc.mobile.att.net
- MMS proxy: proxy.mobile.att.net
- MMS port: 80
- MCC: 310
- MNC: 410
- Authentication Type:
- APN type: default,mms,supl,hipri
- APN Protocol: IPv4
- APN Roaming Protocol: IPv4
- Bearer:(not set – leave it blank)
Alternate Settings 2:
- Name: H2O APN
- APN: att.mvno
- Proxy: 66.209.11.33
- Port: 80
- Username:(not set – leave it blank)
- Password:(not set – leave it blank)
- Server:(not set – leave it blank)
- MMSC: http://mmsc.cingular.com
- MMS proxy: proxy.mvno.H20Mobileweb.com
- MMS port: 80
- MCC:(not set – leave it blank)
- MNC:(not set – leave it blank)
- Authentication Type: PAP
- APN type: default,mms,supl
- APN Protocol:(not set – leave it blank)
- APN Roaming Protocol:(not set – leave it blank)
- Bearer:(not set – leave it blank)
Alternate 3:
- Name: H2O APN
- APN: att.mvno
- Proxy: 66.209.11.33
- Port: 80
- Username:(not set – leave it blank)
- Password:(not set – leave it blank)
- Server:(not set – leave it blank)
- MMSC: http://mmsc.cingular.com
- MMS proxy: proxy.mvno.H20Mobileweb.com
- MMS port: 80
- MCC: 310
- MNC: 410
- Authentication Type: PAP
- APN type: default,mms,supl
- APN Protocol:(not set – leave it blank)
- APN Roaming Protocol:(not set – leave it blank)
- Bearer:(not set – leave it blank)
Locating & Setup H2O Wireless APN Settings on iPhone
Find the APN settings on iPhone can be difficult as, on many occasions, Apple restricts access to the settings. However, if you decide to jailbreak, thus hacking the phone, you will get access to the Access Point Names section on your iPhone. Do you want to navigate to the APN settings on your iPhone? Here is the procedure for navigating to that point.
- Switch on the iPhone and locate the Settings app on your home screen.
- Scroll down until you find the “Cellular” option. You might see the “Mobile Data” option in some models instead.
- Tap on it and scroll to locate the “Cellular Data” option or “Mobile Data Network” in some iPhone models.
After it opens, you will see the APN Settings listed there, where you can either reset them to default or manually edit them. Besides, iPhone allows automatic APN settings configuration by following the steps below;
- Open the Settings app and navigate to the “General” option.
- Scroll down until you find the “About” option.
- If your profile is outdated, you will see a notification for you to update the profile. Once you update the profile, you will automatically update the APN settings.
As seen above, you must navigate the Settings app to enter the phone’s H2O Wireless APN settings to access the internet. Here are the H2O Wireless APN Settings for the iPhone;
- APN: att.mvno
- Username: Not set
- Password: Not set
Some iPhones require you to enter the following H2O Wireless APN settings on the LTE section. However, it is good to note that the option is optional.
- APN: (Leave it empty)
- Username: (Leave it empty)
- Password: (Leave it empty)
After entering the H2O Wireless APN settings, you must tap the home button for the APN settings modified to be saved. However, before saving, you should enter the following MMS settings and restart the phone.
- APN: att.mvno
- Username: Not set
- Password: Not set
- MMSC: Not set
- MMS Proxy: Not set
- MMS Max Message Size: 1048576
- MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
Setup H2O Wireless APN Settings on Windows Phone
Do you have a Windows phone, and are you looking for H2O Wireless APN settings? Do not panic! We got covered. The first step is to access the APN Settings on the Settings app on your phone and enter the following;
- Name: H2O Wireless Internet
- APN: att.mvno
- Username: (Not set)
- Password: (Not set)
- Type of sign-in info: None
- IP Type: IPv4
- Proxy server: (Not set)
- Proxy port: (Not set)
Here I Mention 4 Common Problems That Are People Facing When Setup H2O Wireless APN Settings
Sometimes you will try to connect to the internet with your H2O Wireless phone but in vain. Are you experiencing problems when changing your H2O Wireless APN Settings? Do not worry; in the section below, you will get the remedies to the issues discussed in this section. However, let us look at some of the causes of the APN settings problem on your H2O Wireless phone.
- Your phone software is obsolete : One of the main reasons your H2O Wireless phone is having issues updating the APN settings is that the software needs to be updated. An obsolete software will mostly have problems connecting to the network towers of the carrier. In such a scenario, your APN settings option will be greyed or locked, preventing you from conducting any form of edit.
- Your current location does not have H2O Wireless coverage : The H2O Wireless network coverage of the current location can affect your phone APN settings. If you are in a place without H2O Wireless network coverage, it is obvious you will not have cellular internet. This will automatically grey or lock your APN settings, and you will be unable to modify them.
- Internet caches are preventing you from editing the APN settings : If you have been using internet service from other providers, your phone automatically stores temporary files on the cache memory. This cache data sometimes prevents your phone from connecting to the current network provider. The information mainly accumulates and brings “confusion” to the H2O Wireless network when the phone tries to access the internet. However, do not panic! In the next section, you will get the solutions and start accessing the internet services.
- The phone has hardware issues linked to network services : Network hardware chips on the phone’s motherboard enable your phone to access internet services. If there is a problem with one of the chips linked to the internet access of the phone, you will have problems modifying it. In most cases, the phone will grey or lock the APN section hence preventing you from conducting any modification. As you will see, such an aspect requires you to engage an expert to help you do repair or replacement.
Those are some of the mainly noted reasons that may be causing problems in the APN settings of your H2O Wireless phone. There may be others we should have mentioned that may be the reason you are encountering such issues.
The section below will give you the solutions to the problem discussed above. Kindly note that one problem can be solved by more than one solution, so try all the options until you find the one that works for you. Come with us as we break down the solutions for you.
Follow This 6 Solutions, If You Still Face H2O Wireless APN Settings Problems
APN Settings are essential regardless of the network provider you use when it comes to internet connectivity. They typically carry the data that allows your phone to connect to the internet via the H2O Wireless network. The data has the address information that your phone uses to establish the internet connection. This means that if you use the wrong H2O Wireless APN settings, you will be unable to connect to the internet.
As seen above, when your phone may grey or lock the Access Point Names section and prevent you from doing any modification. We have you covered in this section if you are experiencing such problems. Here are some remedies that can help you restore the internet connection in your phone.
1. Reset your APN Settings to default
Resetting the APN settings on your phone can help you unlock the greyed APN settings section and allow you to edit them. Resetting typically undoes all the APN settings you have ever connected to from the previous network carriers. Once the greyed area unlocks, you can add new H2O Wireless APN settings.
Kindly follow this step-by-step procedure to reset the APN settings on your H2O Wireless phone.
- Switch your phone and tap on the Settings app on the home screen. You can also access the “Settings” app from the top of the navigation bar in the shortcut section.
- Once it opens, tap on the “Network & internet” option.
- Scroll down until you locate the “SIM” option and tap on it to proceed.
- You will see the “Access Point Names” option by scrolling down the listed items.
- On the top-right corner is a three-dotted menu; tap on it and select the “Reset to default” option.
The APN settings will be reset to default, and you can connect to the internet successfully. If resetting does not work for you, kindly proceed to the solution below for more support.
2. Activate and deactivate the Airplane mode
Activating and deactivating the Airplane mode is another solution that can help you reset the APN settings fast. Once you activate the Airplane mode, all customized APN settings usually are reset to default. This unlocks the edit rights, and you can modify it by entering the new H2O Wireless APN settings. Kindly note that you can do the process, and the phone restores internet connectivity without entering the APN settings.
You can find the Airplane mode by opening the Settings app or the shortcut menu on your screen. You can toggle the button to activate and deactivate it. You will see the Airplane icon if you have accessed the option from the shortcut menu. Kindly tap to activate and tap again to activate. Wait for some minutes before you deactivate the Airplane mode for effective results.
3. Remove the H2O Wireless SIM card
Removing the H2O Wireless SIM can also help you reset your APN settings. Once you remove the SIM card and insert it back, H2O Wireless configures the APN settings automatically. This allows your phone to reconnect back to the internet. However, if the H2O Wireless phone does not reconnect to the internet, kindly enter the APN settings manually and save them. This should correct the internet connection problem; if not, proceed to the next option.
4. Reset Network settings
When an extraneous network change occurs, it mainly affects the ability of one to edit APN settings in case of an internet connection problem. As seen before, once the APN section is locked, you cannot edit the APN settings if you have internet problems. This will require you to reset the network to rectify the error and unlock the greyed APN section on your H2O Wireless phone. Kindly follow these steps to reset your network settings.
- Locate the “Settings app” on the home screen.
- Scroll down until you find the “System” section, tap on it.
- You will see the “Reset Options,” so tap on it.
- Locate the “Reset Wi-Fi, Mobile, and Bluetooth” and tap on the “Reset Settings” button shown.
5. Factory reset the phone
Factory reset is one of the effective methods in solving the APN settings problems, but it comes with limits. Before performing the process, you must back up your data, or else you will lose it after factory resetting. You can back up the data on a memory card or google cloud using an Android phone. The main reason you perform the factory reset is to rectify any software problem the phone has.
It would be best if you considered this option the last option because of the dangers of losing the data. If you are ready to factory reset, kindly follow the steps below and execute the process
- Access the “Settings” app from the home screen or shortcut menu on top of the screen.
- Scroll down to find the “System” option.
- Click on the “Reset” option or tap on it.
- Tap the “Erase all data” button to factory reset all data.
The process erases all the data and sets all the network settings to default where your phone can reconnect to the internet. The process sets the phone to the state it was when you bought it new. If the internet does not reconnect again, consider choosing the next procedure.
6. Look for an expert to help you
This is the last step you must take if all the above-discussed remedies do not work for you. The expert you get will examine the phone to determine the problem leading to H2O Wireless APN Settings problems. The professional will then give you a report of the analysis of what is happening with the phone. For instance, if the problem is the hardware, you will have to seek a repair or replacement. The experts mostly advise you on the correct route you need to take based on the phone’s condition. For example, depending on the depth of the problem, you may be advised to buy another new phone.
FAQ
Is the APN Settings text format important?
APN Settings text format is essential to follow the APN Settings text format as we have provided above; otherwise, you will not have access to the internet. There are several text format guidelines that you must follow when updating or editing the H2O APN settings.
- Use capital letters as the settings have been formatted.
- Use commas everywhere you see them in the format.
- Use black spaces as indicated in the format.
- Be careful not to leave blanks where there are no blank spaces.
- Do not put commas where there are not put.
- In the options indicated as blank, ensure you leave them blank.
Kindly note that these settings must be set as they have been formatted. Contrary to that, the APN settings will not work correctly. This means that you will be unable to have internet connectivity, and you will be unable to send the MMS picture messaging.
Does H2O Wireless APN Settings increase internet speeds?
The main objective of H2O Wireless APN settings is to ensure that your phone gets internet connectivity via its network towers. As seen above, APN settings help the phone establish a connection to the service provider you are using, for example, H2O Wireless. To some extent, the H2O Wireless APN settings typically help you increase internet connectivity speed. This allows you to access online platforms like emails, and learning platforms, among others.
How to delete, remove, or uninstall APN settings ?
Deleting, removing, or uninstalling APN settings on your phone can significantly help in restoring your internet connectivity. However, it depends on the phone that you are using. For instance, some phone models like iPhones may restrict you from deleting the APN settings unless you jailbreak.
However, the process is straightforward if your phone allows you to delete or uninstall the APN settings. First, open the “Settings” app and search the “Mobile Network” options. The process may differ depending on the version or model if you are using an Android phone. Click on the Access Point Names to open. You will see a delete option on the menu; tap to execute the delete method.